Menú

Productos >>> Distrbucion de fibra optica >>> Botellas de empalme

OT-SC-D-001 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 4 inlet/outlet ports provided: 3 small ports suit for single fiber cable with max Φ16mm and 1 mass port suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing time and also improve telecommunication quality.

OT-SC-D-002 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 4 inlet/outlet ports provided: 4 ports suit for single fiber cable with max Ø13 and minimum Ø7mm. The inlet/outlet ports could be decided according to quantity and diameter of cable, the corresponding port plugs should be taken away.
2. The fittings provided with OT-SC-D-002: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4pcs of elastic ring, 4pcs of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, 1 piece metal hoop.

OT-SC-D-003 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 4 inlet/outlet ports provided: 3 small ports suit for single fiber cable with max Φ16mm and 1 mass port suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing time and also improve telecommunication quality.

OT-SC-D-004 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 5 inlet/outlet ports provided: 4 small ports suit for single fiber cable with max Φ19mm and 1 mass port suits for 1pc fiber cable with a max Φ45 or 2pcs fiber cables with max Φ25, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing time and also improve telecommunication quality.

OT-SC-D-005 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 5 inlet/outlet ports provided: 4 small ports suit for single fiber cable with max Φ16mm and 1 mass port suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing time and also improve telecommunication quality.

OT-SC-D-006 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 4 inlet/outlet ports provided and the amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time.

OT-SC-D-007 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 4 inlet/outlet ports provided: 4 ports suit for single fiber cable with max Ø13 and minimum Ø7mm.
2. The fittings provided with GJS-D007: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4pcs of elastic ring, 4pcs of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, 1 piece metal hoop.

OT-SC-D-008 Fiber Optic Splice Closure

Characteristics:
Holds up to 240 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 7 inlet/outlet ports provided and the heat shrinkable fixing sleeve should be ordered in addition according to actual requirement.
2. The fittings provided: earthing wire, nylon tie, labeling paper, desiccant, aluminum-foil paper.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, buffer tube for ribbon fiber, small heat shrinkable fixing sleeve and big heat shrinkable fixing sleeve and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time.

OT-SC-D-009 Fiber Optic Splice Closure

Characteristics:
Holds up to 240 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. Two kinds of elastic ring provided: Ø21mm and Ø15mm. Ø21 can be shrunk till Ø13 while Ø15 can be shrunk till Ø7.
2. The fittings provided: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 6 pieces of elastic ring, and 6 pieces of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy or ribbon fiber, 1 piece metal hoop.

OT-SC-D-010 Fiber Optic Splice Closure

Characteristics:
Holds up to 240 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 5 inlet/outlet ports provided and the amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, buffer tube for bunchy fiber, buffer tube for ribbon fiber (6pcs ribbon fibers could be through at the same time), heat shrinkable fixing sleeves and metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which will save installing time and also improve telecommunication quality.

OT-SC-D-011 Fiber Optic Splice Closure

Characteristics:
Holds up to 240 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. Two kinds of elastic ring provided: Ø21mm and Ø15mm. Ø21 can be shrunk till Ø13 while Ø15 can be shrunk till Ø7.
2. The fittings provided with OT-SC-D-011: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 6 pieces of elastic ring, 6 pieces of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy or ribbon fiber, 1 piece metal hoop.

OT-SC-D-012 Fiber Optic Splice Closure

Characteristics:
Holds up to 48 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. One kinds of elastic ring provided: Ø15mm. Ø15 can be shrunk till Ø7.
2. The fittings provided with OT-SC-D-012: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4 pieces of elastic ring, 4 pieces of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, 1 piece metal hoop.

OT-SC-D-013 Fiber Optic Splice Closure

Characteristics:
Holds up to 48 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. One kinds of elastic ring provided: Ø15mm. Ø15 can be shrunk till Ø7.
2. The fittings provided: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4 pieces of elastic ring, 4 pieces of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, 1 piece metal hoop.

OT-SC-D-014 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. One kinds of elastic ring provided: Ø15mm. Ø15 can be shrunk till Ø7.
2. The fittings provided with OT-SC-D-014: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4 pieces of elastic ring, and 4 pieces of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, 1 piece metal hoop.

OT-SC-D-015 Fiber Optic Splice Closure

Characteristics:
Holds up to 48 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1. 4 inlet/outlet ports provided: 3 small ports suit for single fiber cable with max Φ16mm and 1 mass port suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing time and also improve telecommunication quality.

OT-SC-D-016 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.4 inlet/outlet ports provided: 3 small ports suit for single fiber cable with max Φ16mm and 1 mass port suits for 1pc fiber cable with a max Φ38 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing time and also improve telecommunication quality.

OT-SC-D-017 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.5 inlet/outlet ports provided: 4 small ports suit for single fiber cable with max Φ19mm and 1 mass port suits for 1pc fiber cable with a max Φ45 or 2pcs fiber cables with max Φ25, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.
3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip, heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing time and also improve telecommunication quality.

OT-SC-H-001 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-002 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2.Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, aerial mounting bracket, wall-mounting bracket and pole mounting bracket.

OT-SC-H-003 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.GJS- H003 provides one set of elastic seal fitting with 2 inlet/outletΦ14mm ports(if required, the sealing fittings with 4 Φ12 ports or 3 ports with a Φ14port and 2 Φ12 ports also provided). The necessary port plugs should be taken out.
2. The installation accessories: seal tape, insulation tape, 1piece of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, measuring paper, desiccant.
3. Accessories for customers' selection: buffer tube for bunchy fiber, aerial mounting bracket or wall mounting bracket.

OT-SC-H-004 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 3 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-005 Fiber Optic Splice Closure

Characteristics:
Holds up to 192 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 3 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-006 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-007 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-008 Fiber Optic Splice Closure

Characteristics:
Holds up to 192 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-009 Fiber Optic Splice Closure

Characteristics:
Holds up to 192 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-010 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-011 Fiber Optic Splice Closure

Characteristics:
Holds up to 48 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-012 Fiber Optic Splice Closure

Characteristics:
Holds up to 48 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-013 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-H-014 Fiber Optic Splice Closure

Characteristics:
Holds up to 192 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.

OT-SC-D-015 Fiber Optic Splice Closure

Characteristics:
Holds up to 96 fibers and easy to re-enter Cable entry/exit ports
Pressure testing valve and earth deriving device
Intergrated seal, air tight and water proof
Ideal for cable repair and RoHS compliant

Applications:
Can be used in through, branch or mid span splice locations
Suitable for aerial, underground duct or direct burial applications

Characteristics:

Remark:
1.The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant.
2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for ribbon or bunchy fiber.